DAZ-S

Corta-chamas à prova de detonação em linha

Features

State of the Art Protection
for any hydrogen/air mixture
Low Costs
low operating and lifecycle costs
Extended Application Range
for elevated operating temperatures and pressures
Temperature Sensors Possible
use of temperature sensors for G 1½ and G 2 is possible
Modular Design
allows replacement and cleaning of single FLAMEFILTER®
Spare Parts
cost-effective flame arrester / spare parts
Function and Description

In-line detonation flame arresters with Shock Wave Guide Tube Effect

Main component - PROTEGO® flame arrester

The devices are symmetrical and offer bi-directional flame arresting for deflagrations and stable detonations. The arrester essentially consists of two housing Housing A housing is a solid shell, which surrounds a content, either protecting the content from external influences, or protecting the environment from the content. parts with an integrated shock tube (1) and the PROTEGO® flame arrester unit Flame arrester unit Flame arrester casing with FLAMEFILTER® set. (2) in the center. The PROTEGO® flame arrester unit PROTEGO® flame arrester unit The PROTEGO® flame arrester unit is the main component of a flame arrester. It prevents flame propagation. is modular and consists of several FLAMEFILTER® discs (3) and spacers firmly held in a FLAMEFILTER® casing FLAMEFILTER® casing Enclosure for FLAMEFILTER® including insert rings. . The number of FLAMEFILTER® discs and their gap size depends on the arrester‘s intended use.

Many Individual Certifications

By specifying the operating conditions, such as the temperature, pressure, explosion group, and the composition of the fluid, the optimum detonation arrester can be selected from a series of approved devices. The PROTEGO® DA-SB flame arresters are available for all explosion groups. The standard design can be used with an operating temperature Operating temperature Temperature reached when the equipment is operating under design conditions. of up to +60°C / 140°F and an absolute operating pressure Operating pressure Operating pressure is the pressure existing at normal operating conditions within the system being protected. up to bar / 15.9 psi. Numerous devices with special approval for higher pressures (see table 3) and higher temperatures are available upon request. EU conformity according to the currently valid ATEX directive. Approvals according to other national/international regulations on request.
Product Data and Features

Tabela de dimensões

Para selecionar a combinação dos tamanhos nominais/diâmetros nominais (NG/DN), utilize os diagramas de vazão nas páginas seguintes
outras combinações com tamanhos nominais/diâmetros nominais (NG/DN) com capacidade de fluxo melhorada sob solicitação



NG 200 / 8"300 / 12"
DN ≤100 / 4" ≤150 / 6"
a 340 / 13.39 445 / 17.52
b IIC-P1,2-X2 - 640 / 25.20
IIC-P1,2-X3 500 / 19.69 -
IIC-P1,3 - 640 / 25.20
c 415 / 16.34 570 / 22.44

Dimensões em mm

Seleção do grupo de explosão

MESGExpl. Gr. (IEC / CEN)Gas Group (NEC)
< 0,50 mm IIC B

Aprovações especiais sob solicitação

Seleção da pressão máx. de trabalho

MarkingNG200 / 8"300 / 12"
DN ≤100 / 4"' ≤150 / 6"
IIC-P1,2-X3 Pmax - 1,2 / 17.4
IIC-P1,2-X2 Pmax 1,2 / 17.4 -
IIC-P1,3 Pmax - 1,3 / 18.9

Pmáx. = pressão de trabalho máxima admissível em bar absoluta, pressão de trabalho mais elevada sob solicitação

in-between size up to Pmax upon request

Indicação da temperatura máx. de trabalho

≤ 60°C / 140°F≤ 180°C / 356°F≤ 200°C / 392°FTmaximum allowable operating temperature in °C
- X2 X3 Designation

Temperaturas de trabalho mais elevadas sob solicitação

Tipo de conexão flangeada

EN 1092-1; Form B1
ASME B16.5 CL 150 R.F.

Outras conexões sob solicitação

Versão e especificação

There are three different designs available:
Corta-chamas à prova de detonação em linha em Versão básicaDAZ-S-
Corta-chamas à prova de detonação em linha com sensor de temperatura* integrado como proteção adicional contra combustão de curta duração de um ladoDAZ-S-T

Additional special arresters upon request
*Resistance thermometer (Ex i II 1/2 G Ex ia IIC T1…T6 Ga/Gb)

Seleção do material do corpo

DesignAB
Housing Steel Stainless Steel
Heating jacket (DAZ-S-(T)-H-...) Steel Stainless Steel
Gasket PTFE PTFE
Flame arrester unit A, B B

O corpo também pode ser fornecido em aço, com revestimento em ECTFE.

Materiais especiais sob solicitação

Combinações de material do conjunto abafador de chamas

Versão ABCD
Armação do jogo de FLAMEFILTER® Aço Aço inoxidável Aço inoxidávelHastelloy
FLAMEFILTER®* Aço inoxidável Aço inoxidável Aço inoxidávelHastelloy
Espaçadores Aço inoxidável Aço inoxidável Aço inoxidávelHastelloy

*Special materials upon request

Diagrama de vazão

Este diagrama de vazão foi determinado em uma bancada de medição de vazão calibrada e certificada pela TÜV. A vazão V em m³/h se refere ao estado técnico padrão de ar, conforme ISO 6358 (20°C, 1bar). Para conversão em outras densidades e temperaturas, veja o cap. 1: Bases técnicas.

Applications