FA-I-V, FA-I-P

Flame Arresterfor vacuum pumps, compressors and blowers

Features

Versatile Application Options
various uses possible
Modular Design
allows replacement and cleaning of single FLAMEFILTER®
Spare Parts
cost-effective flame arrester / spare parts
Function and Description

Unique Modular System for Optimized Flame Arresters

PROTEGO® FA-I-V devices for the vacuum side and PROTEGO® FA-I-P devices for the pressure side provide a unique modular design that gives every manufacturer of vacuum pumps or comparable devices the option of using optimized and adapted flame arresters. Our expert technical staff will assist you with the proper selection of the devices as well as execution of type testing.

Main component - PROTEGO® flame arrester

PROTEGO® FA-I-V and FA-I-P devices are symmetrical in design. The arrester essentially consists of two housing parts (1) and the PROTEGO® flame arrester unit PROTEGO® flame arrester unit The PROTEGO® flame arrester unit is the main component of a flame arrester. It prevents flame propagation. (2) in the center. The PROTEGO® flame arrester unit is modular and consists of several FLAMEFILTER® (3) and spacers firmly held in a FLAMEFILTER® cage FLAMEFILTER® cage The FLAMEFILTER® cage is a housing for a FLAMEFILTER® set. . The number of FLAMEFILTER® and their gap size depends on the arrester´s conditions of use. PROTEGO® FA-I-V and FA-I-P flame arresters are available for explosion groups IIA to IIC (NEC groups D to B) and special gases such as ethylene oxide.

Tabela de dimensões

Dimensões em mm

Seleção do grupo de explosão

FLAMEFILTER® gapMESGExpl. Gr. (IEC / CEN)Gas Group (NEC)
0.7 mm> 0.90 mmIIAD
0.5 mm≥ 0.65 mmIIB3C
0.3 mm≥ 0.50 mmIIBC
0.2 mm< 0.50 mmIICB

Tipo de conexão flangeada

EN 1092-1; Form B1
ASME B16.5 CL 150 R.F.

Versão e especificação

There are fi ve different designs:
Flame arrester for low pressure side in the basic designFA-I -V - –
Flame arrester for the pressure side in the basic designFA-I -P - –
Flame arrester for the pressure side with integrated temperature sensor* for additional protection against short-time burning on one side (recommended)FA-I -P - T

Additional special devices available upon request
*Resistance thermometer for device Device A device is a pipe component that influences the media flow by opening, closing, or partially shutting off the flow channel or by dividing or mixing the media flow. group II, category (1) 2 (GII cat. (1) 2)

Seleção do material do corpo

DesignABC
HousingSteelStainless steelHastelloy
GasketPTFEPTFEPTFE
Flame arrester unit Flame arrester unit Flame arrester casing with FLAMEFILTER® set. A, B
BC

The housing can also be delivered in steel with an ECTFE coating Coating Coating is the application of a firmly adhering layer of shapeless material to the surface of a workpiece. .

Special materials upon request

Combinações de material do conjunto abafador de chamas

Design ACD
FLAMEFILTER® cageSteelStainless SteelHastelloy
FLAMEFILTER®*Stainless SteelStainless SteelHastelloy
SpacersStainless SteelStainless SteelHastelloy

* the FLAMEFILTER® is also available in the materials Tantalum, Inconel, Copper, etc. when the listed housing and cage materials are used.

Special materials upon request

Applications