DAZ-S

Apagallamas en línea bidireccional

Features

State of the Art Protection
for any hydrogen/air mixture
Low Costs
low operating and lifecycle costs
Extended Application Range
for elevated operating temperatures and pressures
Temperature Sensors Possible
use of temperature sensors for G 1½ and G 2 is possible
Modular Design
allows replacement and cleaning of single FLAMEFILTER®
Spare Parts
cost-effective flame arrester / spare parts
Function and Description

In-line detonation flame arresters with Shock Wave Guide Tube Effect

Main component - PROTEGO® flame arrester

The devices are symmetrical and offer bi-directional flame arresting for deflagrations and stable detonations. The arrester essentially consists of two housing Housing A housing is a solid shell, which surrounds a content, either protecting the content from external influences, or protecting the environment from the content. parts with an integrated shock tube (1) and the PROTEGO® flame arrester unit Flame arrester unit Flame arrester casing with FLAMEFILTER® set. (2) in the center. The PROTEGO® flame arrester unit PROTEGO® flame arrester unit The PROTEGO® flame arrester unit is the main component of a flame arrester. It prevents flame propagation. is modular and consists of several FLAMEFILTER® discs (3) and spacers firmly held in a FLAMEFILTER® casing FLAMEFILTER® casing Enclosure for FLAMEFILTER® including insert rings. . The number of FLAMEFILTER® discs and their gap size depends on the arrester‘s intended use.

Many Individual Certifications

By specifying the operating conditions, such as the temperature, pressure, explosion group, and the composition of the fluid, the optimum detonation arrester can be selected from a series of approved devices. The PROTEGO® DA-SB flame arresters are available for all explosion groups. The standard design can be used with an operating temperature Operating temperature Temperature reached when the equipment is operating under design conditions. of up to +60°C / 140°F and an absolute operating pressure Operating pressure Operating pressure is the pressure existing at normal operating conditions within the system being protected. up to bar / 15.9 psi. Numerous devices with special approval for higher pressures (see table 3) and higher temperatures are available upon request. EU conformity according to the currently valid ATEX directive. Approvals according to other national/international regulations on request.
Product Data and Features

Dimensiones

Para seleccionar la serie y tamaño nominal (DN) – la combinación del ancho nominal (NG), rogamos utilicen el diagrama de flujo volumétrico indicado a continuación



NG 200 / 8"300 / 12"
DN ≤100 / 4" ≤150 / 6"
a 340 / 13.39 445 / 17.52
b IIC-P1,2-X2 - 640 / 25.20
IIC-P1,2-X3 500 / 19.69 -
IIC-P1,3 - 640 / 25.20
c 415 / 16.34 570 / 22.44

Dimensiones en mm / pulgadas

Selección del grupo de explosión

MESGExpl. Gr. (IEC / CEN)Gas Group (NEC)
< 0,50 mm IIC B

Homologaciones especiales bajo petición

Selección de la máxima presión de operación

MarkingNG200 / 8"300 / 12"
DN ≤100 / 4"' ≤150 / 6"
IIC-P1,2-X3 Pmax - 1,2 / 17.4
IIC-P1,2-X2 Pmax 1,2 / 17.4 -
IIC-P1,3 Pmax - 1,3 / 18.9

Pmax = máxima presión de operación permitida en bar / psi absoluto, presiones de operación más altas bajo demanda

in-between size up to Pmax upon request

Especificación de la máx. temperatura de operación

≤ 60°C / 140°F≤ 180°C / 356°F≤ 200°C / 392°FTmaximum allowable operating temperature in °C
- X2 X3 Designation

Temperaturas de operación más altas bajo demanda

Tipo de bridas de conexión

EN 1092-1; Form B1
ASME B16.5 CL 150 R.F.

Otros tipos bajo petición

Modelo y especificación

There are three different designs available:
Apagallamas básico en línea a prueba de detonacionesDAZ-S-
Apagallamas en línea a prueba de detonaciones con sensor de temperatura integrado* para la protección adicional contra la combustión prologada por un lado.DAZ-S-T

Additional special arresters upon request
*Resistance thermometer (Ex i II 1/2 G Ex ia IIC T1…T6 Ga/Gb)

Selección de materiales para la vivienda

DesignAB
Housing Steel Stainless Steel
Heating jacket (DAZ-S-(T)-H-...) Steel Stainless Steel
Gasket PTFE PTFE
Flame arrester unit A, B B

El cuerpo también está disponible en acero con recubrimiento ECTFE.

Materiales especiales bajo demanda

Combinación de materiales para la unidad apagallamas

Modelo ABCD
FLAMEFILTER® Jaula Acero Acero inox Acero inoxHastelloy
FLAMEFILTER®* Acero inox Acero inoxHastelloyHastelloy
Espaciador Acero inox Acero inoxHastelloyHastelloy

*Special materials upon request

Diagrama de flujo volumétrico

Los diagramas de flujo volumétrico han sido determinados con un banco de pruebas de caudal calibrado y certifi - cado por TÜV. El flujo volumétrico V. en [m³/h] y el CFH se refi eren a las condiciones estándar de referencia de aire según ISO 6358 (20°C, 1bar). La conversión a otras densidades y temperaturas están referidas en el Vol. 1: “Fundamentos Técnicos”.

Applications