DR/SV

In-Line Detonation Flame Arrester with shut-off valve, for stable detonations and deflagrations in a straight through design, unidirectional

Features

Easy Maintenance
Extraordinarily Easy to Service
Fastest Disassembly and Assembly
of Single FLAMEFILTER®
Modular Design
Allows Replacement and Cleaning of Single FLAMEFILTER®
Explosion Safety
Provides Protection Against Deflagration and Stable Detonation
Spare Parts
Cost-Effective Spare Parts
Emergency Switch-Offs
No Expensive Emergency Switch-Offs are Required
Vacuum Pumps
Ideal Protective System for Vacuum Pumps
Function and Description

Detonation Arrester With the Advantages of a Shut-Off Valve

The Pressure/vacuum relief valve Pressure/vacuum relief valve is an umbrella term that includes pressure or vacuum relief valve as well as pressure and vacuum relief valve. PROTEGO® DR/SV Flame Arrester Flame arrester Device fitted to the opening of an enclosure, or to the connecting pipe work of a system of enclosures, and whose intended function is to allow flow but prevent the transmission of a flame. Series ideally combines the function of a detonation arrester Detonation flame arrester Flame arrester designed to prevent the transmission of a detonation. with the advantages of a Shut-Off Valve. In case of ignition, the fire can be stabilized within the Flame Arrester when the flammable gas continues to flow. Inside the detonation arrester, is a valve (1) that closes in case of fire, stops the additional supply of fuel and extinguishes the flames.

Suction-Side Protection for Compressors and Pumps

Temperature sensors in combination with an emergency switch off do not have to be installed if the type PROTEGO® DR/SV device Device A device is a pipe component that influences the media flow by opening, closing, or partially shutting off the flow channel or by dividing or mixing the media flow. is used. This device is particularly useful for the sucction-side protection of compressors and pumps.

For Explosion Group IIA

Once a detonation Detonation Explosion propagating at supersonic velocity and characterized by a shock wave (EN 1127-1: 1997). enters the Flame Arrester, energy is absorbed from the detonation shock wave by the central plate disc (2) before the flame is extinguished in the narrow gaps of the two FLAMEFILTER® discs (3). This device can be used for fluids of explosion Explosion Abrupt oxidation or decomposition reaction producing an increase in temperature, pressure, or in both simultaneously. group IIA (NEC group D). The In-Line Detonation Flame Arresters are unidirectional and equipped with a threaded connection. The thread can be executed to international standards. The standard design can be used up to an operating temperature Operating temperature Temperature reached when the equipment is operating under design conditions. of +60°C / 140°F and an (absolute) operating pressure Operating pressure Operating pressure is the pressure existing at normal operating conditions within the system being protected. up to 1.1 bar / 15,9 psi. EU conformity according to the currently valid ATEX directive. Approvals according to other national/international regulations on request.
Product Data

Tabela de dimensões

Para selecionar o diâmetro nominal (DN), utilize os diagramas de vazão nas páginas seguintes

DNG ½"G ¾"
a115115
b100100

Dimensões em mm

Seleção do grupo de explosão

MESG Gr. expl. (IEC / CEN) Grupo gás (NEC)
> 0,90 mmIIAD

Aprovações especiais sob solicitação

Seleção da pressão máx. de trabalho

DNG ½"G ¾"
Pmáx.1,11,1

Pmáx. = pressão de trabalho máxima admissível em bar absoluta, pressão de trabalho mais elevada sob solicitação

Indicação da temperatura máx. de trabalho

≤ 60°C / 140°F Ttemperatura máxima de trabalho admissível em °C
-Designation

temperaturas de trabalho mais elevadas, sob solicitação

Seleção do material do corpo

Versão A B
CorpoLatão Aço inoxidável
VedaçãoWS 3822WS 3822
Conjunto abafador de chamasAA, B

Materiais especiais sob solicitação

Combinações de material do conjunto abafador de chamas

DesignAB
FLAMEFILTER®*Stainless SteelStainless Steel
Spacer Spacer The spacer is a component that is generally used in a PROTEGO® flame arrester as a spacer within the FLAMEFILTER® se Stainless SteelStainless Steel
Support for FLAMEFILTER®BrassStainless Steel
WasherBrassStainless Steel

* the FLAMEFILTER® are also available in the materials Tantalum, Inconel, Copper, etc. when the listed housing Housing A housing is a solid shell, which surrounds a content, either protecting the content from external influences, or protecting the environment from the content. and cage materials are used.

Special materials upon request

Tipo de conexão

Rosca para tubo DIN ISO 228-1 DIN

Outras conexões roscadas sob solicitação

Diagrama de vazão

Este diagrama de vazão foi determinado em uma bancada de medição de vazão calibrada e certificada pela TÜV. A vazão V em m³/h se refere ao estado técnico padrão de ar, conforme ISO 6358 (20°C, 1bar). Para conversão em outras densidades e temperaturas, veja o cap. 1: Bases técnicas.

Applications

Instalações de processamento

Sistemas de combustão a vapor

Armazenamento em tanques

Tanques de armazenamento de álcool

Se você tiver alguma dúvida, comentário ou sugestão, nossa equipe de especialistas terá prazer em ajudá-lo.

Picture of Mrs. Auris-Nadine Hillen
Mrs. Auris-Nadine Hillen

CSR Department

+49 (0)5307 809 108